A-C
The toothed gear belts which are used in conjunction with
a drive pulley to transfer movement from the motors to other parts of a machine. Usually fibre-r...
Thu, 14 May, 2015 at 4:21 PM
This is the tube which delivers the filament to the print head.
It is manufactured from PTFE to reduce the friction on the internal surfaces while maintai...
Thu, 14 May, 2015 at 4:21 PM
This refers to a feature in the printed object where an
unsupported flat surface is produced by essentially printing ‘in thin air’. It is achieved by movi...
Thu, 14 May, 2015 at 4:21 PM
‘Brim’ is a term applied to 3D printing which describes a large
flat area which is printed around the part to help with bed adhesion and warping - like th...
Thu, 14 May, 2015 at 4:22 PM
This is the enclosed area of Robox® where parts are produced,
and is designed to maintain the ambient temperature and prevent draughts from affecting the ...
Thu, 14 May, 2015 at 4:22 PM
This refers to the maximum dimensions of an object which can
be produced with Robox® - 210x150x100mm (LxWxH)
Thu, 14 May, 2015 at 4:22 PM
The mostly automated process of adjusting software/hardware
parameters in AutoMaker™ to take into account any differences in the manufacturing/assembly pr...
Thu, 14 May, 2015 at 4:23 PM
This refers to a moving assembly which is constrained to one
axis - Robox® has 3 - the Z carriage which holds the X motor and rails, the X carriage that h...
Thu, 14 May, 2015 at 4:24 PM