This describes the assembly which includes the Z carriages, X rails and X carriage. Its level is adjustable using two independent Z drive screws.
Fri, 15 May, 2015 at 2:40 PM
The industry standard language for CNC control commands - it has two distinct subsets - G and M codes, where G codes are motion commands, and M codes are ...
Fri, 15 May, 2015 at 2:40 PM
Refers to the printhead replacement system in Robox® - it allows you to change the printhead quickly and easily.
Fri, 15 May, 2015 at 2:40 PM
High Impact Polystyrene - a simple thermoplastic which is frequently used as dissolvable support material as it bonds well to most plastics and can be dis...
Mon, 25 Apr, 2016 at 2:37 PM
As there is no direct feedback from the stepper motor in terms of position, homing is how Robox® determines the location of all axes before starting a pri...
Thu, 14 May, 2015 at 4:53 PM
Hot End
This commonly refers to the heated nozzle section of the extrusion system and includes the heater block and nozzles inside the printhead.
Fri, 15 May, 2015 at 2:41 PM
This describes the tendency for some thermoplastics to absorb moisture from the air.
Fri, 15 May, 2015 at 2:42 PM
See fill.
Fri, 15 May, 2015 at 2:43 PM