J-L
Kapton® is a trade name of polyimide, frequently used for high
temperature adhesive tapes and films. Many other printers use
Kapton® film as a bed surface...
Fri, 15 May, 2015 at 2:46 PM
This describes the height in mm of each individual layer of the
3D printed object. The thinner each layer is, the smoother the
appearance of the outside s...
Fri, 15 May, 2015 at 2:46 PM
This refers to the process of ensuring the nozzle is always the
same distance from the print bed to ensure accurate extrusion,
good base surface finish an...
Fri, 15 May, 2015 at 2:47 PM
This is a mechanical component which is used to constrain
motion to 1 DoF (Degree of Freedom) - i.e. it can only move
along a rail and cannot rotate. Line...
Fri, 15 May, 2015 at 2:47 PM