M-O
This refers to a sequence of GCode instructions which are
executed sequentially to perform a particular function.
Fri, 15 May, 2015 at 2:52 PM
This is a term which is used to describe whether a surface
model contains any gaps in its surface - i.e. whether it is
‘watertight’. Non-manifold surface ...
Fri, 15 May, 2015 at 2:53 PM
Methyl ethyl ketone, also known as butanone is commonly
used as an industrial solvent and polymer cement. It can be
used for joining together printed part...
Fri, 15 May, 2015 at 2:53 PM
A term used by us to describe the manufacture of objects on
your desktop - i.e. a personal factory. Also used in industry to
describe the manufacture of v...
Fri, 15 May, 2015 at 2:58 PM
A method of increasing the number of steps per rotation of a
stepper motor by varying the supply to the coils, allowing for
increased resolution and smoot...
Fri, 15 May, 2015 at 2:58 PM
This is the part of the printhead through which material is
extruded. Robox® has two nozzles of different diameters -
0.3mm and 0.8mm - with the smaller b...
Fri, 15 May, 2015 at 3:00 PM
On Robox® this is used to describe the difference between the
mechanically determined surface position (the bed) and the
actual position.
Fri, 15 May, 2015 at 3:09 PM
On Robox® this describes the point at which plastic begins to
flow from the nozzle, based on the position of the needle valve
Fri, 15 May, 2015 at 3:09 PM